Brother International Innov-is XJ2 Operation Manual - Page 73
Zigzag Stitches
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
b Turn the fabric and iron the folded parts only. 1 Surface c Select and attach presser foot "J". d Sew a straight stitch along the fold. 1 Width for pintuck 2 Wrong side 3 Surface e Iron the folds in the same direction. UTILITY STITCHES Zigzag Stitches Cord Guide Bobbin Cover (Using a Zigzag Stitch) a Remove the bobbin cover from the machine (page 34). b Thread the gimp thread through the hole in the cord guide bobbin cover from bottom to top. Position the thread in the notch at the back of the cord guide bobbin cover. a 1 Notch 2 Gimp thread 3 b c Snap the sure that cord guide bobbin cover into place, the gimp thread can be fed freely. making * Make sure there are no restrictions when feeding the thread. VARIOUS STITCHES d Set the zigzag 3/32 inch). width from 2.0-2.5 mm (approx. 1/16 - e Attach advanced monogramming foot "N+". f Position the fabric right side place the cord to the rear of up on top of the machine the cord and under the presser foot. 1 Fabric (right side) 2 Gimp thread 71