Brother International LK3-B430 Instruction Manual - Page 40
Trouble, shooting
View all Brother International LK3-B430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Trouble shooting Trouble Thread slips out of needle at first stitch Therad breaks Skipped stitches Needle breaks Cause Check point Remedy Page Thread take-up lever stroke Stroke of thread take-up - Adjust stroke of thread take-up lever to suit fabric 29 too small. lever. being sewn. Upper thread tension too Upper thread tension. great. Needle incorrectly installed. Direction of needle. Adjust to appropriate tension. 22 Install needle with long groove facing front. 18 Thread too thick for needle. Needle and thread. See "Selecting a needle and thread". 19 Lower thread tension too great. Lower thread tension. Adjust to appropriate ten- 21 sion. Clearance between needle and tip of shuttle hook too large. Clearance between needle and shuttle hook. Adjust clearance between needle and shuttle hook. 26 Poor contact between needle and shuttle hook. Needle bar stroke. Adjust stroke of needle bar. 25 Needle received too deeply Clearance between shuttle into shuttle driver. driver and needle. Adjust shuttle driver and needle contact. 26 Needle is bent. Bent needle. See "Selecting a needle and thread" and replace needle. 19 Needle incorrectly installed. Direction of needle Install needle with long groove facing front. 18 Needle contacting tip of Clearance between needle shuttle hook. and shuttle hook. Adjust clearance between needle and shuttle hook. 26 Needle is bent. Wayward stitching. Bent needle. dNeedle and feed timing. See "Selecting a needle and 19 thread" and replace needle. Adjust needle and feed timing. 28 - 36 -