Cisco SPA2102-SF Administration Guide - Page 123

ATA Voice Field Reference Info page B VoIP Call Decode Latency VoIP Call Jitter VoIP Call Round Trip Delay VoIP Call Packets Lost VoIP Call Packet Error VoIP Call Mapped RTP Port Number of milliseconds for decoder latency. Number of milliseconds for receiver jitter. Number of milliseconds for delay. Number of packets lost. Number of invalid packets received. The port mapped for Real Time Protocol traffic for Call 1/2. Voice tab > Info page > Trunk Status section (SPA8000) Registration State Indicates if the line has registered with the SIP proxy. Last Registration At Last date and time the line was registered. Next Registration In Number of seconds before the next registration renewal. Message Waiting Indicates whether you have new voice mail waiting. Options are either Yes or No. This value is updated when voice mail notification is received. You can also manually modify it to clear or set the flag. Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is stored in long term memory and survives after reboot or power cycle. Mapped SIP Port Port number of the SIP port mapped by NAT. Cisco Small Business ATA Administration Guide 123