Cisco SPA2102-SF Administration Guide - Page 148

ATA Voice Field Reference Regional page B CPC Duration Duration in seconds for which the tip-to-ring voltage is removed after the caller hangs up. After that, tip-to-ring voltage is restored and dial tone applies if the attached equipment is still off-hook. CPC is disabled if this value is set to 0. Range: 0 to 1.000 second. Resolution is 0.001 second. The default is 0 (CPC disabled). Voice tab > Regional page > Vertical Service Activation Codes section Vertical Service Activation Codes are automatically appended to the dial-plan. There is no need to include them in dial-plan, although no harm is done if they are included. Call Return Code This code calls the last caller. Call Redial Code The default is *69. Redials the last number called. This field is not found in the PAP2T. The default is *07. Blind Transfer Code Begins a blind transfer of the current call to the extension specified after the activation code. The default is *98. Call Back Act Code Starts a callback when the last outbound call is not busy. Call Back Deact Code Call Back Busy Act Code The default is *66. Cancels a callback. The default is *86. Starts a callback when the last outbound call is busy. This field is only found in the PAP2T. Cfwd All Act Code The default is *05 Forwards all calls to the extension specified after the activation code. The default is *72. Cisco Small Business ATA Administration Guide 148