Cisco SPA2102-SF Administration Guide - Page 141

ATA Voice Field Reference Regional page B Ring Back 2 Tone Confirm Tone SIT1 Tone SIT2 Tone SIT3 Tone SIT4 Tone MWI Dial Tone Cfwd Dial Tone Your ATA device plays this ringback tone instead of Ring Back Tone if the called party replies with a SIP 182 response without SDP to its outbound INVITE request. The default value is the same as Ring Back Tone, except the cadence is 1s on and 1s off. The default is 440@-19,480@-19;*(1/1/1+2). Brief tone to notify the user that the last input value has been accepted. The default is 600@-16; 1(.25/.25/1). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1428@-16,1777@-16;20(.380/0/ 1,.380/0/2,.380/0/3,0/4/0). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@-16;20(.274/0/ 1,.274/0/2,.380/0/3,0/4/0). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@-16;20(.380/0/ 1,.380/0/2,.380/0/3,0/4/0). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1371@-16,1777@-16;20(.380/0/ 1,.274/0/2,.380/0/3,0/4/0). Played instead of the Dial Tone when there are unheard messages in the caller's mailbox. The default is 350@-19,440@-19;2(.1/.1/1+2);10(*/0/ 1+2). Played when all calls are forwarded. The default is 350@-19,440@-19;2(.2/.2/1+2);10(*/0/ 1+2). Cisco Small Business ATA Administration Guide 141