Cisco SPA2102-SF Administration Guide - Page 202

ATA Voice Field Reference PSTN Line page (SPA3102) B SIP Remote-Party- To use the Remote-Party-ID header instead of the From ID header, select yes. Otherwise, select no. SIP GUID The default is yes. This field is not available with the PAP2T. The Global Unique ID is generated for each line for each device. When it is enabled, the ATA device adds a GUID header in the SIP request. The GUID is generated the first time the unit boots up and stays with the unit through rebooting and even factory reset. This feature was requested by Bell Canada (Nortel) to limit the registration of SIP accounts. SIP Debug Option The default is yes. SIP messages are received at or sent from the proxy listen port. This feature controls which SIP messages to log. Choices are as follows: • none-No logging. • 1-line-Logs the start-line only for all messages. • 1-line excl. OPT-Logs the start-line only for all messages except OPTIONS requests/responses. • 1-line excl. NTFY-Logs the start-line only for all messages except NOTIFY requests/responses. • 1-line excl. REG-Logs the start-line only for all messages except REGISTER requests/responses. • 1-line excl. OPT|NTFY|REG-Logs the start-line only for all messages except OPTIONS, NOTIFY, and REGISTER requests/responses. • full-Logs all SIP messages in full text. • full excl. OPT-Logs all SIP messages in full text except OPTIONS requests/responses. • full excl. NTFY-Logs all SIP messages in full text except NOTIFY requests/responses. • full excl. REG-Logs all SIP messages in full text except REGISTER requests/responses. • full excl. OPT|NTFY|REG-Logs all SIP messages in full text except for OPTIONS, NOTIFY, and REGISTER requests/ responses. RTP Log Intvl The default is none. The interval for the RTP log. Cisco Small Business ATA Administration Guide 202