Compaq Armada 6500 Compaq Storage Hub 12 Management Utilities Hardware and Sof - Page 62
Show Port Properties, Verify Port Status, Check Firmware Versions, Port Context Menu
View all Compaq Armada 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3-10 Compaq Storage Hub 12 Management Utilities Hardware and Software User Guide From the Ports tab: 1. Click the Bypass Control check box by the appropriate port number to check or uncheck the Bypass control box. This box toggles between Set and Cancel for this field. 2. Click OK or Cancel at the message. From the physical device panel Port Context Menu: 1. Right click over the port of choice in the Device View. The Port Context Menu will display. 2. Click Force bypass port, or Enable port to set or cancel this option. 3. Click OK or Cancel at the informational message. The Status field can change to represent the state of the port following the setting or canceling of port bypass control. If the port is enabled, that port has a properly operating Fibre Channel device connected to it and the port has not had its force bypass control set. If the port is bypassed, the port has had its Force Bypass control set, or else no properly operating Fibre Channel device has been connected to the port (as determined by the device). Show Port Properties To view all of the port information from the Expanded Device View, click on the Ports tab. Alternately, in Device View, right click over any port and select Port Details. Verify Port Status To verify a port's status, from Expanded Device View: 1. Click the Ports tab. 2. Verify the status for the port number in question. Check Firmware Versions From Expanded Device View, click the Service tab. In this view, firmware revisions of the agent and the device controller can be checked.