Compaq Evo n800c Hardware Guide, Compaq Notebook Series - Page 92
External Device Connections, Connecting a Standard Device
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
6 External Device Connections Connecting a Standard Device The jacks and connectors described in this guide support standard external devices. ■ For information about which jack or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software required by the device, refer to the device documentation, the operating system Help files, or the device manufacturer's Web site. To connect a standard external device to the notebook: 1. If you are connecting a powered device, be sure the device is turned off. 2. Connect the device to a jack or connector on the notebook. 3. If you are connecting a powered device, plug the device power cord into a grounded electrical outlet. 4. Turn on the device. ✎ If a properly connected external monitor or other display device does not display an image, try pressing the Fn+F4 hotkeys to switch the image to the new device. To disconnect a standard external device from the notebook, turn off the device (if it is powered), then disconnect the device from the notebook. Hardware Guide 6-1