Fluke 125 Fluke 125 Users Manual - Page 15
Warning, For the PM8907/808 universal Battery
View all Fluke 125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Warning To avoid electrical shock or fire: • Use only the power supply, Model PM8907 (Battery Charger / Power Adapter). • Before use check that the selected/indicated voltage range on the PM8907 matches the local line power voltage and frequency. • For the PM8907/808 universal Battery Charger/Power Adapter use only line cords that comply with the local safety regulations. Note To accommodate connection to various line power sockets, the PM8907/808 universal Battery Charger / Power Adapter is equipped with a male plug that must be connected to a line cord appropriate for local use. Since the adapter is isolated, the line cord does not need to be equipped with a terminal for connection to protective ground. Since line cords with a protective grounding terminal are more commonly available you might consider using these anyhow. Safely Using the Test Tool Warning To avoid electrical shock or fire if a Test Tool input is connected to more than 42 V peak (30 Vrms) or on circuits of more than 4800 VA: • Use only insulated voltage probes, test leads and adapters supplied with the Test Tool, or indicated as suitable for the Fluke 125 Test Tool. • Before use, inspect voltage probes, test leads and accessories for mechanical damage and replace when damaged. • Remove all probes, test leads and accessories that are not in use. • Always connect the battery charger first to the ac outlet before connecting it to the Test Tool. • Do not apply input voltages above the rating of the instrument. Use caution when using 1:1 test leads because the probe tip voltage will be directly transmitted to the Test Tool. • Do not use exposed metal BNC or banana plug connectors. • Do not insert metal objects into connectors. • Always use the Test Tool only in the manner specified. 0-5