Fluke 125 Fluke 125 Users Manual - Page 78
Charging the Rechargeable Battery Pack, Charging the Battery Pack
View all Fluke 125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Fluke 125 Users Manual Charging the Rechargeable Battery Pack At delivery, the batteries may be empty and must be charged to fill them completely. Charging time is 7 hours (test tool is off). When fully charged, the batteries typically provide 6 hours of use at full brightness. Operating time is extended at normal brightness. When battery powered, the battery indicator on the bottom of the screen informs you about the condition of the battery. The battery symbols are: . The battery symbol indicates that there are typically five minutes of operating time left. Use the setup as shown in Figure 8-1 to charge the battery pack and power the instrument. Turn the test tool off to charge the batteries more quickly. Note The test tool uses a trickle charge for the batteries, so no damage can occur if you leave it charging for long periods, e.g., through the weekend. Figure 8-1. Charging the Battery Pack 8-2