Fluke 125 Fluke 125 Users Manual - Page 32
Selecting Auto/Manual Ranges, Changing the Graphic Representation, on the Screen
View all Fluke 125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Fluke 125 Users Manual Selecting Auto/Manual Ranges Press to automatically adjust the position, range, time base, and triggering (Connect-and-View). This assures a stable display on nearly all waveforms. The bottom line shows the range, the time base for both inputs, and the trigger information. AUTO appears at the bottom of the reading area. Press a second time to select the manual range. MANUAL appears at the bottom of the reading area. Changing the Graphic Representation on the Screen From Auto range, you can use the light-gray rocker keys to change the graphic representation on the screen manually. This will turn off the Connect-and-View function! Observe that AUTO at the bottom of the reading area disappears. Changing the Amplitude c Enlarge the waveform. d Reduce the waveform. Available settings are from 5 mV/div to 500 V/div when using the test leads. Changing the Time Base c Increase the number of periods. d Decrease the number of periods. Available settings are from 10 ns/div to 5 s/div in normal mode. 2-10