Fluke 125 Fluke 125 Users Manual - Page 22
Measurement Probes & Settings, Open the PROBE on A B menu
View all Fluke 125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Fluke 125 Users Manual Measurement Probes & Settings For the SCOPE/METER mode and the HARMONICS mode various probes can be used for the test tool measurement functions, for example a 10:1 voltage probe, a 1mV/°C Temperature probe, or a 10 mV/A current clamp. To adapt the test tool readout to the used probe, do the following: c (A) The Input A or Input B MEASUREMENTS menu and a F1....F4 button bar pops up. (B) d Open the INPUT... menu. e Highlight SELECT... f Open the PROBE on A (B) menu g Highlight the required probe type h Accept the probe type. The menu will be closed. i 2x Close the INPUT... menu. 1-6
Fluke 125
Users Manual
1-6
Measurement Probes & Settings
For the SCOPE/METER mode and the HARMONICS
mode various probes can be used for the test tool
measurement functions, for example a 10:1 voltage probe,
a 1mV/
°
C Temperature probe, or a 10 mV/A current
clamp.
To adapt the test tool readout to the used probe, do the
following:
(A)
(B)
The Input A or Input B
MEASUREMENTS menu and a
F1….F4 button bar pops up.
Open the INPUT… menu.
Highlight SELECT…
Open the PROBE on A (B) menu
Highlight the required probe type
Accept the probe type. The menu
will be closed.
2x
Close the INPUT… menu.