Garmin GPS III Plus Owner's Manual - Page 66

REFERENCE GOTO / GOTO Options By highlighting a waypoint name on a list and pressing GOTO, you won't have to manually enter the name of your destination waypoint. A GOTO can also be initiated from the map display by placing the panning arrow on the desired target waypoint, city or highway exit. 56 To designate a GOTO waypoint from a list of waypoints: 1. Highlight the desired waypoint on the list and press GOTO. A confirmation page shows the selected destination waypoint. 2. Press ENTER to confirm the selected waypoint and begin navigating. To GOTO an existing waypoint, city or highway exit on the map display: 1. Use the rocker keypad to place the arrow on the desired target location. If a city or exit is selected, a waypoint will be created at that location using the city or exit name. 2. Press GOTO, followed by ENTER, to begin navigating. To GOTO any position on the map display: 1. Use the rocker keypad to place the arrow on any position you wish to navigate to. 2. Press GOTO to create a waypoint, called 'MAP', at the arrow position. Each time you perform this step it will overwrite any previously created 'MAP' waypoint. 3. Press ENTER to being navigating. GOTO Options GOTO Options are also provided to initiate a TracBack route or cancel the current GOTO destination. To display the GOTO Options, press MENU (immediately after pressing GOTO). The following options are available: TracBack- allows you to retrace your path using the track log automatically stored in the receiver's memory. This eliminates the need to store waypoints along the way. (See page 58 for more information about TracBack.)