Garmin GPS III Plus Owner's Manual - Page 96
Appendix - mount
UPC - 753759015817
View all Garmin GPS III Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
APPENDIX A Dashboard Mounting The GPS III+ can be mounted on the dashboard of an automobile or to another convenient surface using the two Velcro™ strips provided with the unit. Be sure to read the warnings on page ii before mounting the GPS in a vehicle! To mount the GPS III+ using the Velcro strips: 1. Select a location for the unit that provides a clear and unobstructed view of the sky. 2. Remove the paper strip liners from both pieces of Velcro. 3. Make sure the surface to which you're adhering the Velcro is clean and dry. Place the adhesive side of the rough piece of Velcro on the desired mounting surface, and press into place. 4. Place the adhesive side of the smooth piece of Velcro on the bottom of the unit (between the rubber anti-skid bumps), and press into place. 5. Mount the unit, placing one piece of Velcro on top of the other. Optional Dash Mounting Bracket An optional dash mount bracket is also available for your GPS III+. This bracket allows you to adjust the GPS III+ for best viewing angle, while installed on the dash of a vehicle. The dash mount bracket may be permanently installed or temporarily mounted using supplied Velcro 86 fasteners.