HP 2700n Service Manual - Page 28

Menu item Courier font Display contrast Sub-menu item Color supply out Replace supplies Cartridge low Restrict color Regular Dark Medium Darker Darkest Lightest Lighter Sub-menu item Stop Continue black Override out Stop at out Low threshold (1-20) Enable color Disable color Description Select Stop to halt printing until the empty cartridge is replaced. Select Continue black to allow future color jobs to print in monochrome (black and white) mode until the empty cartridge is replaced. Override out: If the printer determines that a print cartridge is empty, you can continue printing until you notice a decrease in print quality. Stop at out: If the printer determines that a print cartridge is empty, you must replace the cartridge before printing can continue. This is the default setting. The percentage threshold determines when the printer begins reporting low toner. The message is either reported on the control-panel display or using the toner LED, if it exists. The default setting is 10%. Select Enable color to allow the job to print in either monochrome (black and white) or color depending on the specifications of the job. Select Disable color to disable color printing. All jobs will print in monochrome (black and white). Selects a version of the Courier font. The default is Regular. Select the level of contrast for the display. The default setting is Medium. 10 Chapter 1 Product information ENWW