HP 8000f Maintenance and Service Guide: HP Compaq 8000f Elite Business PC Ultr - Page 152
Network Server Mode Active and No, Keyboard failure while Network Server
UPC - 885631750551
View all HP 8000f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Table F-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action 2231-ME error during MEBx execution Error occurred during MEBx execution which fails into "ME" grouping. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2232-AMT error during MEBx execution Error occurred during MEBx execution which fails into "AMT" grouping. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2233-HECI error during MEBx execution Error occurred during MEBx execution which fails into "MEI or HECI" grouping. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2239-ME image lock failure Special system configurations with reduced 1. Reboot the computer. ME firmware image require BIOS control of ME firmware upgrading. A failure has 2. If the error persists, update to the latest occurred after the ME firmware update BIOS version and ME firmware process in which the BIOS could not relock version. the ME firmware region. 3. If the error still persists, replace the system board. 2240-ME image unlock failure Special system configurations with reduced 1. Reboot the computer. ME firmware image require BIOS control of ME firmware upgrading. A failure has 2. If the error persists, update to the latest occurred prior to the ME firmware update BIOS version and ME firmware process in which the BIOS could not unlock version. the ME firmware region. 3. If the error still persists, replace the system board. Invalid Electronic Serial Number Electronic serial number is missing. Enter the correct serial number in Computer Setup. Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode enabled. 1. Reconnect keyboard with computer turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. Parity Check 2 Parity RAM failure. Run Computer Setup and Diagnostic utilities. 142 Appendix F POST Error Messages