HP 8000f Maintenance and Service Guide: HP Compaq 8000f Elite Business PC Ultr - Page 65

Front Fan,

Page 65 highlights

Front Fan The front fan sits against the front on the left side of the chassis. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 30). 2. Remove the computer access panel (Computer Access Panel on page 38). 3. Disconnect the fan control cable from the red system board connector labeled CHFAN. 4. Tilt the fan slightly toward the rear of the computer, and then lift the fan straight up and out of the chassis. Figure 6-30 Removing the front fan To install the front fan, reverse the removal procedure. Front Fan 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Front Fan
The front fan sits against the front on the left side of the chassis.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
30
).
2.
Remove the computer access panel (
Computer Access Panel
on page
38
).
3.
Disconnect the fan control cable from the red system board connector labeled CHFAN.
4.
Tilt the fan slightly toward the rear of the computer, and then lift the fan straight up and out of the
chassis.
Figure 6-30
Removing the front fan
To install the front fan, reverse the removal procedure.
Front Fan
55