HP Color LaserJet 4730 HP Color LaserJet 4730mfp - Software Technical Referenc - Page 307

Installation in Macintosh 5. Click the product name to open the Select Printer screen and verify that the product has been installed. Figure 6-5 Select Printer screen Setting up a product with Mac OS X V10.3 1. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility. 2. Click Add Printer (in Mac OS X V10.1), or click Add (Mac OS X V10.2), or click Printers and then click Add Printer (Mac OS X V10.2.8 or later). 3. When the New Printer drivers detected popup box appears, click OK. 4. From the top pop-up menu, select the appropriate connection type for your product. 5. Select or type in any other information as indicated for the type of connection for your product. For example, if you are using an AppleTalk connection, select your product zone; or if you are using IP Printing, type an IP address in the Printer Address field. In the Printer Model drop-down menu, select HP. In the Model Name drop-down menu, select HP Color LaserJet 4730mfp. NOTE If the automatic selection fails, or if you want to manually select a .PPD file, click the Printer Model pop-up menu, select HP, and then select the .PPD file you want to add. 6. Click Add. The HP Color LaserJet 4730mfp appears in the Printer List. 7. To configure installable options in Mac OS X V10.2 and later, such as a duplexing unit or optional paper trays, click Show Info? and select Installable Options in the drop-down menu. NOTE This step is necessary only for network connections and USB connections using Rendezvous/Bonjour. AppleTalk automatically configures the installable options. 8. Configure the options, click Apply Changes, and then close the Printer List dialog box. ENWW Installing the Macintosh printing system 285