HP Color LaserJet 4730 HP Color LaserJet 4730mfp - Software Technical Referenc - Page 341

Engineering Details Windows 98 or Windows Me 1. From a command prompt or in an MS-DOS window, type the following: Mode lpt1:,,p NOTE If the product is attached to a parallel port other than LPT1, then substitute the correct LPT port number in the mode command. 2. Press Enter on the keyboard. The response you receive should be similar to these examples: > LPT1 Not Rerouted > Resident portion of MODE loaded > Infinite retry on parallel printer time-out 3. At a command prompt, type copy /b , where is the name of the print-ready file (including the path) and is the name of the appropriate printer port (such as LPT1). For example, at the c:\> command prompt, type the following: copy /b c:\4730MFPFW.PDF lpt1 NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type C:\>copy /b "c:\My Documents \4730MFPFW.PDF" 4. Press Enter on the keyboard. The message PROCESSING JOB appears on the control panel, and the job prints. 5. At the command prompt, type exit to close the command window. Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 The print-ready file can be sent directly to the product by typing a copy command at a command prompt or in an MS-DOS window. 1. At a command prompt, type copy /b , where is the name of the print-ready file (including the path) and is the name of the appropriate printer port (such as LPT1). For example, type the following: C:\>copy /b c:\4730MFPFW.PDF lpt1 2. Press Enter on the keyboard. NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type C:\>copy /b "c:\My Documents \4730MFPFW.PDF". The message PROCESSING JOB appears on the control panel, and the job prints. 3. At the command prompt, type exit to close the command window. ENWW Printing print-ready documents 319