HP Officejet Pro K5300 User Manual - Page 75

Light description/Light pattern, Explanation and, recommended action, Resume

Page 75 highlights

(continued) Light description/Light pattern The Power light blinks. The Power light and the Resume light blink. The Power light is on and the Resume light blinks. Explanation and recommended action The device is turning on or off, or is processing a print job. No action is required. The device is pausing for the ink to dry. Wait for the ink to dry. Print media is jammed in the device. Remove all media from the output tray. Locate and clear the jam. For more information, see Clear a jam in the device. The device carriage has stalled. • Open the top cover and remove any obstructions (such as jammed media). • Press (Resume button) to continue printing. • If the error persists, turn the device off, and then on again. The device is out of paper. Load paper and press (Resume button). The Power light and the Resume light are on. A cover is not closed completely. Make sure all covers are completely closed. The rear access panel or duplex unit is missing, or is not inserted completely. Make sure the rear access panel or the duplex unit is inserted completely at the back of the device. (These features are available with some models.) Interpreting control-panel lights 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103

Light description/Light pattern
Explanation and
recommended action
The Power light blinks.
The device is turning
on or off, or is
processing a print job.
No action is required.
The device is pausing
for the ink to dry.
Wait for the ink to dry.
The Power light and the Resume light blink.
Print media is jammed
in the device.
Remove all media from
the output tray. Locate
and clear the jam. For
more information, see
Clear
a
jam
in
the
device
.
The device carriage
has stalled.
Open the top
cover and remove
any obstructions
(such as jammed
media).
Press
(
Resume
button) to continue
printing.
If the error
persists, turn the
device off, and
then on again.
The Power light is on and the Resume light blinks.
The device is out of
paper.
Load paper and press
(
Resume
button).
The Power light and the Resume light are on.
A cover is not closed
completely.
Make sure all covers
are completely closed.
The rear access panel
or duplex unit is
missing, or is not
inserted completely.
Make sure the rear
access panel or the
duplex unit is inserted
completely at the back
of the device. (These
features are available
with some models.)
(continued)
Interpreting control-panel lights
71