HP Rp2430 rp24xx A180 User Manual - Page 22
A-Class Server System Installation, Overview - boot
View all HP Rp2430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
A-Class Server Installation A-Class Server System Installation A-Class Server System Installation Overview The sections listed below describe the procedures you will use to prepare for, install, and begin operation of, your A-Class server: A-Class Server Site Preparation. Contains environmental requirements for preparing the area where your server is to be located. Stand-Alone A-Class Server Unpack and Install Instructions. Details what you will find when you open the carton containing your A-Class server and how to set it up for stand-alone operation. Cabinet-Mounted A-Class Server System Unpack and Install. Tells you how to install and connect the server to external devices and power, either as a stand-alone unit or in an HP-supported cabinet. Unpacking, set up, and connection information is also included for those who ordered a cabinet from the factory with one or more servers installed, A-Class Server System Software Configuration. Tells you how to install memory (RAM), cache memory, embedded disk and I/O card add-on components. A-Class Server Power Up and Boot Procedures. Leads you through the process for powering up external devices and the server, gives the software commands for customizing the A-Class Secure Web Console IP address, and lists the steps required for booting the server to an operating state. A-Class Server System Software Configuration. Directs you to the software commands necessary for preparing both the A-Class server and the A-Class Secure Web Server for operation. 22 Chapter 2