HP Rp2430 rp24xx A180 User Manual - Page 55

Configuring the Web Console, Using the ping Command

Get HP Rp2430 - Server - 650 MHz PDF manuals and user guides View all HP Rp2430 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Chapter 2 A-Class Server Installation A-Class Server Power Up and Boot Procedures Configuring the Web Console To configure the Web console for other A-Class servers, repeat all of the steps in this section. Use arp -a to display arp entries and use arp-d to delete the previous entry for IP 192.0.0.192. For example, to configure the Web Console for A-Class servers with MAC addresses of 0060b0a60ale and 001083a62a3e using a PC with an IP of 15.43.251.93, proceed as follows: At the C:\> prompt, type: route add 192.0.0.192 15.43.251.93 and press Enter. Using the ping Command At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. At the C:\> prompt, type: arp -s 192.0.0.192 00-60-b0-a6-0a-1e At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Return to Configure the Web Browser and Configure The integrated A-Class Web Console Software. Using the arp -a Command At the C:\> prompt, type: arp -a and press Enter. The terminal will display: Internet Address Physical Address Type 15.43.248.1 192.0.0.192 00-00-0c-07-ac-0 dynami 0 c 00-60-b0-a6-0a- static 1e At the C:\> prompt, type: arp -d 192.0.0.192 and press Enter. At the C:\> prompt, type: arp -s 192.0.0.192 00-10-83-a6-0a-1e and press Enter. At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
A-Class Server Installation
A-Class Server Power Up and Boot Procedures
Chapter 2
55
Configuring the Web Console
To configure the Web console for other A-Class servers, repeat all of the steps in this
section. Use
arp -a
to display arp entries and use
arp-d
to delete the previous entry for
IP 192.0.0.192.
For example, to configure the Web Console for A-Class servers with MAC addresses of
0060b0a60ale and 001083a62a3e using a PC with an IP of 15.43.251.93, proceed as
follows:
At the C:\> prompt, type:
route add 192.0.0.192 15.43.251.93
and press
Enter
.
Using the ping Command
At the C:\> prompt, type:
ping 192.0.0.192
and press
Enter
.
The terminal will display:
Pinging 192.0.0.192 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
At the C:\> prompt, type:
arp -s 192.0.0.192 00-60-b0-a6-0a-1e
At the C:\> prompt, type:
ping 192.0.0.192
and press
Enter
.
The terminal will display:
Pinging 192.0.0.192 with 32 bytes of data:
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Return to Configure the Web Browser and Configure The integrated A-Class Web
Console Software.
Using the arp -a Command
At the C:\> prompt, type:
arp -a
and press
Enter
.
The terminal will display:
At the C:\> prompt, type:
arp -d 192.0.0.192
and press
Enter
.
At the C:\> prompt, type:
arp -s 192.0.0.192 00-10-83-a6-0a-1e
and press
Enter
.
At the C:\> prompt, type:
ping 192.0.0.192
and press
Enter
.
The terminal will display:
Pinging 192.0.0.192 with 32 bytes of data:
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Internet
Address
Physical
Address
Type
15.43.248.1
00-00-0c-07-ac-0
0
dynami
c
192.0.0.192
00-60-b0-a6-0a-
1e
static