HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 216

Configuring the Disk Array HP-UX After installing the disk array software, the following steps must be performed to configure the disk array for operation. These steps should be performed by the service-trained installer with assistance from the customer where appropriate. Step 1. Determine the Disk Array ArrayID The ArrayID is used to identify the disk array when performing the remaining tasks, so the first step is to determine the ArrayID. To display the ArrayID, type: amdsp -i Record the ArrayID (its S/N) for use in performing the remaining steps. Step 2. Assign an Alias Name (Optional) To simplify managing the disk array(s), an alias name can be assigned to each disk array. Once assigned, the alias can be used in place of the ArrayID when performing the remaining steps. An alias can include upper case characters, numbers, pound sign (#), period (.), and underscore (_). All other characters are invalid. To assign an alias, type: ammgr -D • For more information, see "Assigning an Alias to the Disk Array" on page 297 • To use SAM, see "Assigning an Alias to the Disk Array" on page 264 216 Configuring the Disk Array