HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 318

Table 40 LUN Status Conditions (cont'd) Status Definition/Action AM60: DEGRADED--REPLACED DISK BEING REBUILT STM: DEGRADED - 2 AM60: DEAD--MORE DISK FAILURES THAN REDUNDANT DISKS STM: UNAVAILABLE - 4 AM60: DEAD--FORMAT IN PROGRESS STM: BINDING A rebuild is in progress on the LUN. No action is required. Multiple, simultaneous disk failures have occurred on the LUN, causing data to be inaccessible. On a RAID 5 LUN, losing more than one disk will cause this status. On a RAID 1 or 0/1 LUN, you must lose both disks of a mirrored pair before this status will occur. Replace the failed disks. A formatting operation (writing zeros) is in progress on a DEAD LUN. This occurs while the LUN is being bound. No action is required. AM60: UNDEFINED STM: DEGRADED - 83 OR UNAVAILABLE - 83 AM60: DEAD--CREATION IN PROGRESS STM: UNAVAILABLE - 84 This state indicates a drive failure during a LUN binding process. If a hot spare has been designated, the LUN state should transition to Optimal once the LUN binding is complete. If no hot spare is in place, the LUN state should transition to Degraded--Waiting for Repair Action (Degraded--1), once the binding is complete. A formatting operation has been queued for this LUN, but has not started yet. No action is required. AM60: DEAD--WRONG DISK REMOVED OR REPLACED STM: UNAVAILABLE - 116 The wrong disk was removed from a degraded LUN. Reinstall the disk. AM60: INACCESSIBLE:POSSIBLY The special device files are not installed on the LUN. NO DEVICE FILE Run insf -e on the LUN. STM: UNAVAILABLE - 254 AM60: UNDEFINED STM: UNAVAILABLE - xxx The LUN is in an unknown state. Contact your service representative. 318 Status Conditions and Sense Code Information