HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 290

• RAIDlevel - RAID level used for the LUN. Valid RAID levels are 0, 1, and 5. RAID 0 support requires firmware version HP08 or later. A RAID 0/1 LUN is created by selecting RAID 1 with more than two disks. • - options giving you control over how the LUN is configured. Table 38 lists valid options and what they do. Note After binding a LUN, you must execute the insf -e command to install special device files for the LUN. This makes the LUN usable by the operating system. Table 38 Command Options for Binding a LUN Option Description Default -c capacity Specifies the capacity of the LUN. Capacity can be specified in megabytes (M) or gigabytes (G) by appending the appropriate letter to the capacity value. By default, the LUN will use the entire capacity available from all the disks. It is possible to specify a lower value for LUN capacity, but this will result in unused disk capacity. Any capacity not included in the LUN will be inaccessible and is essentially wasted capacity. If not specified, the LUN capacity will equal the total available capacity of the specified disks. If a capacity value is specified but no letter is appended, gigabytes will be assumed. 290 Managing the Disk Array Using Array Manager 60