HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 283
Command Example, amdsp, a Array1, Missing UTM LUN 31, Table 37,
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
Table 37 Command Options for Displaying Disk Array Status (cont'd) Option Status Information Displayed -a -p -r -A All status. This option displays all the information returned by the preceding options. Hardware path information. Displays hardware path information for the controller corresponding to the specified device file. Rebuild status. Display the progress of any rebuilds occurring on the disk array. Array server status. Command Example The following example all status information for disk array Array1. amdsp -a Array1 A sample out put from this command is shown in Figure 88. The important fields are identified with the normal values. Note Missing UTM LUN 31 If the required patches for HP08 firmware are not installed on the host, the host will not recognize or display UTM LUN 31. If LUN 31 is not displayed, install the required patches as described in "Installing the Disk Array FC60 Software" on page 214. Managing the Disk Array on HP-UX Managing the Disk Array Using Array Manager 60 283