HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 286

Information for Controller A - 000A00A0B80673A6: Controller Status = GOOD Controller Mode = ACTIVE Vendor ID = HP Product ID = A5277A Serial Number Firmware Revision Boot Revision HP Revision = 1T00310110 = 04000304 = 04000200 = HP08 Controller Information - make sure the following conditions are met: - Both controllers should be ACTIVE Loop ID AL_PA = 5 = 0xE0 - The Loop ID must be unique for each controller Preferred AL_PA Controller Date Controller Time = 0xE0 = 05/08/2000 = 13:38:53 - The three levels of firmware revisions must be identical for each controller Cache Battery Age = 0 to 89 days NVSRAM Checksum = 0x353181DF Information for Controller B - 000A00A0B80673A6: Controller Status = GOOD Controller Mode = ACTIVE Vendor ID = HP Product ID = A5277A Serial Number = 1T90510188 Firmware Revision = 04000304 Boot Revision = 04000200 HP Revision = HP08 Loop ID = 4 AL_PA = 0xE1 Preferred AL_PA = 0xE1 Controller Date = 05/08/2000 Controller Time = 13:38:54 Cache Battery Age = 0 to 89 days NVSRAM Checksum = 0x353181DF Information for Disk SCSI Channel System = 1 2 (USSA02010592), Controller B:Disk Enclosure Information make sure the following Thumbwheel Setting = 0 conditions are met: Controller Status = GOOD Vendor ID = HP - The status of both controllers Product ID = A5294A (BCCs) should be GOOD Serial Number = USSA02010649 - The Thumbwheel Setting Firmware Revision = HP04 must be the same for each Information for Disk System 1 (USSA02010592), Controller A:controller SCSI Channel Thumbwheel Setting Controller Status Vendor ID Product ID = 1 = 0 = GOOD = HP = A5294A - The Thumbwheel Setting should correspond to the enclosure position in the rack. Uppermost enclosure set to 0, next one down set to 1, etc. Serial Number = USSA02010592 i ii 286 Managing the Disk Array Using Array Manager 60