HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 426

Environmental Specifications Note The HP SureStore E Disk Array FC60 has been tested for proper operation in supported Hewlett-Packard cabinets. If the disk array is installed in an untested rack configuration, care must be taken to ensure that all necessary environmental requirements are met. This includes power, airflow, temperature, and humidity. Failure to meet the required operating specifications may result in product failure. Operating Environment For continuous, trouble-free operation, the high availability disk array should not be operated at its maximum environmental limits for extended periods of time. The recommended operating range provides a less stressful operating environment. Operating within the recommended operating range ensures maximum reliability for the disk array. The following specifications were type-tested under controlled conditions. HewlettPackard maintains an active program of auditing production products to ensure these specifications remain true when products are again tested under the same conditions. The limits of these specifications do not represent the optimum for long, trouble-free operation and are specifically not recommended for maximum customer satisfaction. The recommended conditions are stated separately where appropriate. Temperature and Altitude: • Operating temperature: 5º C to 40º C (50º F to 104º F) Recommended: 20º C to 25.5º C (68º F to 78º F) • Maximum gradient: 20º C per hour (36º F per hour) • Relative humidity: Recommended: 20% to 80% noncondensing, max. wetbulb at 26º C 30% to 50% noncondensing • Altitude: 3000 m (10,000 ft) 426 A5294A/AZ Disk Enclosure Specifications