HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 394
Disk Enclosure Power Supply Module, Removing the Power Supply Module
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
Disk Enclosure Power Supply Module ! Hot Swappable Component! A failed power supply module should be replaced as soon as possible. When one power supply fails, the remaining power supply will maintain the proper operating voltage for the disk enclosure. However, if the remaining power supply fails before the first power supply is replaced, all power will be lost to the disk enclosure. CAUTION Do not remove a power supply module until you have a replacement. An empty slot will disrupt the cooling airflow within the enclosure and may cause overheating. Removing the Power Supply Module 1. Disconnect the power cord to the power supply. 2. Loosen the screw (B in Figure 98) from the power supply handle (A). 3. Pull the handle down to disengage the power supply from the backplane. 4. Slide the power supply out of the chassis. Support the power supply with your free hand as it clears the chassis. 394 Disk Enclosure Modules