HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 222

Using the Disk Array FC60 as a Boot Device (HP-UX Only) The Disk Array FC60 is supported for use as boot device on the following HP 9000 Servers running HP-UX 11.0: - K-Class - D-Class - N-Class - L-Class Note Not all levels of server PDC (processor dependent code) support Fibre Channel boot. Before performing the following procedure, ensure that the level of PDC on the server supports booting from a Fibre Channel device. To serve as a boot device, the Disk Array FC60 must have a suitable LUN created on it. If the disk array has a LUN structure on it, an available LUN can be used for the boot disk, or another LUN can be created. This applies to a disk array that has already been in use, and when installing a new factory assembled disk array (A5277AZ). When installing a field racked disk array,(A5277A), it will be necessary to create a LUN before the disk array can be used as a boot device. 222 Using the Disk Array FC60 as a Boot Device (HP-UX Only)