HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 321

Component Status Conditions Component status conditions are organized into the categories listed in Table 42. The interpretation and action associated with a status depends on the component. See Table 51 on page 379 for more information on Disk System SC10 component status. The component status condition terminology used by Array Manager 60 (AM60) may differ from that used by STM. Both terms are identified in the table. Table 42 Component Status Conditions Status Description AM60: Good STM: Optimal AM60: Non-critical STM: Fault - 3 The component is operating normally. A component or condition such as temperature or voltage has exceeded warning limits. AM60: Critical STM: Fault - 2 AM60: Not Installed STM: Not Present AM60: Unknown STM: Fault - 0 Although immediate action is not required, the cause of the non-critical status should be investigated and corrected if necessary. A component has failed or a condition such as temperature or voltage has exceeded critical limits. Immediate action is required. The component is not installed. The status of the component cannot be determined. Managing the Disk Array on HP-UX Status Conditions and Sense Code Information 321