Lenovo ThinkPad 380ED TP 380Z User's Reference that was provided with the syst - Page 140

Your PC Card supports PCMCIA Release 2.0

Get Lenovo ThinkPad 380ED PDF manuals and user guides View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals

Page 140 highlights

Title: C79EPMST CreationDate: 06/22/98 12:00:09 Troubleshooting Charts Problem Your PC Card modem does not work. PC Card support software does not recognize your PC Card. Action Make sure that the infrared port is disabled and the modem is set up correctly. Make sure that the COM port you set for the modem with the ThinkPad Configuration program is the same in the following procedure and that there is no resource conflict. For Windows 98: To set up the modem, do the following: 1. Click on Start and move the cursor to Settings and Control Panel. 2. Click on Control Panel, and then double-click on Modem. The "Modem Properties" window appears. 3. Make sure the PC Card (PCMCIA) modem is in the window. 4. Click on Properties, not Dialing Properties. 5. Click on the Connection tab. 6. If there is a check mark ( ) in the Wait for dial tone before dialing check box, click and remove it. 7. Click on the Advanced... button. 8. If there is a check mark ( ) in the Use error control check box, click and remove it. 9. Put a check mark ( ) in the Use flow control check box by clicking on it, and make sure that Hardware (RTS/CTS) is selected. 10. Close the window by clicking on OK. 11. Return to the "Modem Properties" window by clicking on OK. 12. Click on Dialing Properties in the "Modem Properties" window, and fill in all boxes. Note: Click on either Tone dialing or Pulse dialing. Most telephones today use tone dialing. 13. Click on OK. 14. Click on Close to close the window. 15. Close all active windows. Run your modem application again. Make sure that: If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you have the proper client device driver for the card. Your PC Card supports PCMCIA Release 2.0, 2.01, or 2.10. Refer to the manual that came with your PC Card. If your PC Card does not support PCMCIA Release 2.0, 2.01, or 2.10, you cannot use PC Card Director. Contact your PC Card supplier. Your PC Card is working by following the diagnostic instructions for your PC Card, if any. 124 IBM ThinkPad 380Z User's Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
Troubleshooting Charts
Problem
Action
Your PC Card modem
does not work.
Make sure that the infrared port is disabled and the modem is set up correctly.
Make sure that the COM port you set for the modem with the ThinkPad
Configuration program is the same in the following procedure and that there is
no resource conflict.
For Windows 98:
To set up the modem, do the following:
1. Click on
Start
and move the cursor to
Settings
and
Control Panel
.
2. Click on
Control Panel
, and then double-click on
Modem
.
The “Modem Properties” window appears.
3. Make sure the PC Card (PCMCIA) modem is in the window.
4. Click on
Properties
,
not
Dialing Properties
.
5. Click on the
Connection
tab.
6. If there is a check mark (
) in the
Wait for dial tone before dialing
check
box, click and remove it.
7. Click on the
Advanced...
button.
8. If there is a check mark (
) in the
Use error control
check box, click and
remove it.
9. Put a check mark (
) in the
Use flow control
check box by clicking on it,
and make sure that
Hardware (RTS/CTS)
is selected.
10. Close the window by clicking on
OK
.
11. Return to the “Modem Properties” window by clicking on
OK
.
12. Click on
Dialing Properties
in the “Modem Properties” window, and fill in all
boxes.
Note:
Click on either
Tone dialing
or
Pulse dialing
.
Most telephones
today use tone dialing.
13. Click on
OK
.
14. Click on
Close
to close the window.
15. Close all active windows.
Run your modem application again.
PC Card support software
does not recognize your
PC Card.
Make sure that:
If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you
have the proper client device driver for the card.
Your PC Card supports PCMCIA Release 2.0, 2.01, or 2.10.
Refer to the
manual that came with your PC Card.
If your PC Card does not support PCMCIA Release 2.0, 2.01, or 2.10, you
cannot use PC Card Director.
Contact your PC Card supplier.
Your PC Card is working by following the diagnostic instructions for your PC
Card, if any.
124
IBM ThinkPad 380Z User's Reference
Title: C79EPMST CreationDate: 06/22/98 12:00:09