Magellan Meridian Platinum User Manual - Page 75
Turning the Beeper On/Off, Default: Keys & Alarms, Selecting NMEA Message, Default: Off,
UPC - 763357103267
View all Magellan Meridian Platinum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Reference Turning the Beeper On/Off - Allows you to select which actions will cause the beeper to sound. You can choose from Off, Keys Only (pressing a key causes a beep), Alarms Only (when an alarm is activated) or Keys & Alarms. From Any Screen MENU Highlight Setup ENTER Highlight Beeper ENTER Select Beeper Options ENTER Default: Keys & Alarms Selecting NMEA Message - Allows the selection of the NMEA message that will be output from the Meridian. Choices are Off, V1.5 APA, V1.5 XTE or V2.1 GSA. Your choice will be dependent upon what message the device you are connecting to needs to receive. From Any Screen MENU Highlight Setup ENTER Highlight NMEA ENTER Select ENTER NMEA Message Default: Off Selecting the Baud Rate - Enables you to set the baud rate of the data being sent out from the Meridian's output port. The baud rate sent out must match the baud rate that the receiving device is set for. You can choose from 1200 baud, 4800 baud, 9600 baud, 19200 baud, 57600 baud or 115200 baud. From Any Screen MENU Highlight Setup ENTER Highlight Baud Rate ENTER Select Baud Rate ENTER Default: 4800 Baud 64 Magellan Meridian GPS Receiver