Magellan Meridian Platinum User Manual - Page 99
To install the card, hold it with two fingers with the label facing you.
UPC - 763357103267
View all Magellan Meridian Platinum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Appendix The Magellan Secure Digital (SD) Memory Cards can be added to any of the Meridian line of GPS receivers through the battery compartment. Magellan offers the memory cards in 8, 16, 32 and 64 MB configurations. The addition of the memory card to your Meridian will increase the amount of data that can be uploaded to the Meridian from any of the Magellan MapSend CD-ROM products. To Add or Remove the memory card: 1. Turn the Meridian off. 2. Remove the battery door. 3. Remove both of the AA batteries. 4. To remove the card, push the card slightly towards the top of the Meridian. You will feel a slight click which is the locking mechanism disconnecting and then you will feel the memory card pushing against your finger. Allow the memory card to slide back towards the battery compartment. Now carefully continue to slide the memory card out of the channel it's in and lift it out. 5. To install the card, hold it with two fingers with the label facing you. Place the top of the memory card in the channel provided in the battery compartment. Carefully push the memory card towards the top of the Meridian receiver until you feel it lock into place. Do not force the memory card. Forcing the memory card could cause damage to the card and/or the Meridian receiver. 6. Reinstall the batteries into the battery compartment. Be sure to observe the proper polarity. 7. Replace the battery compartment door. 8. Turn on the Meridian GPS receiver. 88 Magellan Meridian GPS Receiver