Oki PRO510DW Pro510DW Printing Guide - Page 80
Caution
View all Oki PRO510DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DUPLEX (DOUBLE-SIDED) PRINTING If your printer has a duplex unit installed you can print on both sides of the paper, to save paper, weight, bulk and cost. NOTE If this choice does not appear in the driver screens, or if it is greyed out, check to ensure that the hard disk is enabled in the printer driver. (See "Setting the driver device options" on page 13.) > Only paper can be used for duplex printing, not transparencies or other media. > Use paper stock of 75-188 g/m² maximum. If you experience excessive curling with 75-90 g/m² paper, use 105 g/m². CAUTION! Paper weights are given as a guide only and may not be available for use with your printer. Always check the paper weight specifications in your User's Guide before printing. Do not exceed the recommended paper weight specified. > Use standard sized paper stock only, e.g. A4, A3, Letter, etc. > Load the paper print side up. Ream wrappers are usually marked with an arrow, indicating which is the print side. > Paper can be fed from standard paper trays, including the high capacity feeder if you have one. NOTE For paper stock greater than 120 g/m² use the multipurpose tray. > Do not set the paper weight to Ultra Heavy. > Do not enable the White Page Skip function. Finishing options > 80