Panasonic AJ-HPD2500 Operating Instructions - Page 129
Automatic Recording of Cards, Connections, Enter the mode that permits control of external, devices.
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Connections Automatic Recording of Cards Registering IN and OUT points makes possible automatic recording (AUTO CAPTURE) between those two points. 1 Enter the mode that permits control of external devices. Press the PLAYER button when the unit is in the recording/ playback mode. 2 Select an area for capture. • Use the following buttons to select an area for capture. IN+ENTRY Registers IN points IN+RESET Deletes IN points OUT+ENTRY Registers OUT points OUT+RESET Deletes OUT points IN+GOTO Sends a CUE-UP command to move to an IN point OUT+GOTO Sends a CUE-UP command to move to an OUT point IN Checks an IN point (counter indication) OUT Checks an OUT point (counter indication) IN+OUT Checks a DUR (counter indication) 3 Hold down the SHIFT button and press the REC button. • The specified area is automatically registered on the card. • The PLAYER button flashes during operation. • The current point is registered as an IN point if an IN point has not been registered. • Recording stops automatically when the OUT point is reached. If an OUT point has not been registered, recording continues until the STOP button is pressed. Connections: External Remote Control 129