Panasonic AJ-HPD2500 Operating Instructions - Page 181
TC&UB, EXT_L, LTC of the TIME CODE IN connector
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Setup Item Setting FR SUPER No. DISP. FR SUPER No. DISP. Settings and brief function description When set to 59.94 Hz, Specifies the position where the VITC signal will be inserted. 29.97 Hz, 23.98 Hz, 24 Hz, 59-23 Hz, 60-24 Hz NOTE: • You cannot select the same line as in setup menu No. 501 (VITC POS-1). • The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected in 0000 10L setup menu No.25 (SYSTEM FREQ). | | • You cannot select the same line as in setup menu No.692 (UMID POS). 0008 18L • This setting is available only during analog composite output and SD SDI output. | | • This setting does not return to the factory default even if you press the SEARCH button 502 VITC POS-2 0010 20L and RESET button simultaneously. When set to 50 Hz, 25 Hz, 60-25 Hz 0000 7L | | 0006 13L | | 0015 22L 504 RUN MODE 0000 0001 REC FREE Specifies an operating mode that advances the internal time code generator. 0: The internal time code generator is advanced only during recording. 1: When the power is on, the internal time code generator is advanced regardless of operating mode. NOTE: When setup menu No. 040 (VFR REC) is set to ON, the time code advances only during recording even when FREE is selected. 505 TCG REGEN 0000 0001 0002 TC&UB TC UB Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN mode. 0: Regenerates both the time code and the user bit 1: Regenerates only the time code 2: Regenerates only the user bit 507 EXT TC SEL 0000 0001 0002 EXT_L SLTC SVITC 59.94Hz 50Hz 23.98Hz 24Hz 29.97Hz 25Hz only Specifies the time code used when an external time code is used. 0: LTC of the TIME CODE IN connector 1: LTC data attached to serial signal input to HD SDI IN 2: VITC data attached to serial signal input to HD SDI IN NOTE: When SLTC and SVITC are set, the VITC in the input video signal is used when an analog composite or SD SDI input signal is selected. 508 BINARY GP 0000 0001 0002 0003 0004 0005 0006 0007 000 Specifies user bit usage in time code generated by the TCG. 001 0: NOT SPECIFIED (character set not specified) 010 1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022) 011 2: UNASSIGNED 1 (undefined) 100 3: UNASSIGNED 2 (undefined) 101 4: UNASSIGNED 3 (undefined) 110 5: PAGE/LINE 111 6: UNASSIGNED 4 (undefined) 7: UNASSIGNED 5 (undefined) 509 PHASE CORR 0000 0001 OFF ON 59.94Hz 50Hz 23.98Hz 24Hz 29.97Hz 25Hz only Specifies whether or not LTC output from the TIME CODE OUT connector should be phase controlled. 0: No phase control 1: Phase controlled 510 TCG CF FLAG 0000 0001 OFF ON 59.94Hz 50Hz Sets the TCG CF flag. 0: OFF 1: ON 29.97Hz 25Hz 60-25Hz only Setup: Item Settings 181