Panasonic AJ-HPD2500 Operating Instructions - Page 193
Saving Menu Settings to SD Memory Cards, CARD READ
![]() |
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Setup ■ Switching system frequency Use the steps below to change system frequency. 1 Change setting in setup menu No. 25 (SYSTEM FREQ). 2 Press the MENU button. The following confirmation dialog appears to enable the setting. Press the SET button to enable the new setting. Press the EXIT button to disable the new setting. 3 Turn off the power, then turn it back on again. The system restarts with the selected system frequency. Saving Menu Settings to SD Memory Cards Use the steps below to write SETUP menu settings to or load from SD memory cards. The unit can handle up to four files and enables the input of titles. 2,3 SETUP-MENU SD CARD READ 01 FILE1 1080_60I 02 FILE2 720_60P * 03 FILE3 480_50I 04 NO FILE END 3 Press the button with the desired function (see below) in the load confirmation dialog that appears. 3 31 CARD READ 1 Press the MENU button, select A10 CARD READ from USER1 in the setup menu and press the SET button. 2 Select the files to be read in the file menu that appears and press the SET button. • Files that are not written are indicated as [NO FILE]. • "NO CARD" is indicated when no SD memory card is inserted. SET button: Loads all SYSTEM settings and USER 1-5 data MULTI SEL Loads USER 1-5 data only (SHIFT + SET) button: EXIT: Cancels loading and returns to the previous screen 4 A completion message appears when the load progress bar closes. SETUP-MENU SD CARD READ FILE3 480_50I READ OK Setup: Item Settings 193
![](/manual_guide/products/panasonic-ajhpd2500-operating-instructions-cdffed5/193.png)