Panasonic AJ-HPD2500 Operating Instructions - Page 84

- SET button Selecting and deselecting an event at cursor location. - Hold down the SET button for 1 second or longer Selecting the same IN/OUT events at the cursor location. - Use of the MULTI SEL (SHIFT + SET) button after selecting one event: This operation selects all events from a previously selected location up to the current location. - CANCEL (SHIFT + EXIT) button This operation cancels all selections. 13.Mark indicating change in audio level This mark appears on events to indicate that a change in audio level has occurred, but only if the event has room for the mark. 14.Seek bar Indicates the current playback position of the recorder. Next playback will start from the location indicated on the seek bar. 6. IN/OUT point thumbnail indication ➝Refer to "3. Event indication". 7. Indication of section without video or audio ➝Refer to "3. Event indication". 8. Invalid event indication ➝Refer to "3. Event indication". 9. Recorder IN point indication A green triangle (a) indicates the location of an IN point when a recorder IN point is set. 10. Recorder OUT point indication A red triangle (b) indicates the location of an OUT point when a recorder OUT point is set. 15.Indication of change in audio channels Indicates the channel numbers where material was switched for events whose audio channels were switched. No indication is made for events that remain unchanged or for events when the indication does not have room for channel numbers. 16.Display of duration of event at cursor location Displays the time (duration) of the event at the cursor location. 17.Total playlist time indication Indicates the total duration of all events. Data bar 11. Scale indication Displays the time code and scale according to the zoom ratio of the timeline. When REPLACE TC The timeline indicates the time is ON: code for start, middle and end positions. When REPLACE TC The time code is not indicated. is OFF: 12. Start time code indication When REPLACE TC The set start time code value is is ON: indicated. When REPLACE TC is displayed. is OFF: The A.DUB mode indicates time remaining for a voiceover, not the start time code. 1 2 1. Playlist format indication Indicates playlist format. 34 2. Playlist name indication Indicates the name of a playlist. ◆ NOTE: • No indication appears for playlists without names. • Playlist names that are too long are abbreviated and end in "..". 3. Indication of slots storing playlist files The numbers of slots that store playlist files are indicated in white. Slots that do not store a playlist are indicated in white "-" symbol. Slots containing read-only files are indicated in gray. Slots with P2 cards that do not contain any saved files are indicated in red "-" symbol. 84 Editing: Playlist Function