Panasonic AJ-HPD2500 Operating Instructions - Page 58

Selecting Clips Select clips for processing in the thumbnail screen as described below. 1 2 Canceling a selection 1 Place the cursor on a selected clip and press the SET button again. This cancels the selection. ◆ NOTE: • Hold down the SHIFT button and press the EXIT button to cancel all the made selections. 1 Use the cursor buttons to place the yellow frame (cursor) on the desired clip. ◆ NOTE: • Hold down the SHIFT button and press the REW/FF button or the cursor buttons (4 / 5 / b / a) to move the cursor to the first or last clip. 2 Press the SET button. A blue frame appears on the clip selected with the cursor to indicate that it is selected. ◆ NOTE: • Repeat steps 1 and 2 to select multiple clips. • After selecting a clip, move the cursor to another clip, hold down the SHIFT button and press the SET button to select another clip. This method allows you to select the two clips as well as all the clips between them. • Selecting a clip updates the number of selected clips shown in the lower right corner of the screen. 58 Clip Management: Selecting Clips