Panasonic AJ-HPD2500 Operating Instructions - Page 20
using RS-422A., 25PN Native.
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
recorded as the time code. The unit can also be used as a player for an editing system using RS-422A. ◆ NOTE: • Some USB keyboards may not enable normal input. ■ Compatible with HD and SD This unit can record and play back HD and SD signals. It can also handle analog video and SDI input and output. ■ Audio AES/EBU input and output supported (16-bit, 48 kbps/8ch) The unit comes with a 8-channel AES/EBU input and output interface as standard. This enables interfacing with digital audio equipment and digital VTRs using a 48 kHz sampling rate. In addition, 8-channel PCM audio where each channel (HDSDI·AES/EBU has 8 independent channels while the analog interface has 2 independent channels) can be recorded separately or mixed. ■ AVCHD option (AJ-YCX250G) Installation of the AJ-YCX250G, an optional AVCHD codec board, will enable recording and playback of the AVCHD format on SD memory cards. This makes the following possible. • Dubbing AVCCAM recorded clips onto a P2 card in the DVCPROHD or AVC-Intra format, playlist editing of such clips and ingesting such clips to non-linear editor. • Dubbing P2 card clips recorded on a P2HD camerarecorder to an SD memory card in the AVCHD format. • HD-SDI or other external input can be recorded as DVCPROHD or AVC-Intra to a P2 card simultaneous with recording of the same input in AVCHD format video on an SD memory card. ■ Waveform and vector display The LCD screen can display either video waveform or vector waveform. During up-conversion, a waveform is displayed after upconversion. ◆ NOTE: • A waveform is not displayed when there is no input signal. ■ HD-SDI remote When the unit is connected to a camera-recorder with an external device control, start and stop of recording of HD-SDI signal input can be automatically controlled through recording start and stop signals in the input. ■ USB keyboard A USB keyboard can be connected to enable the following functions. ● Entry and editing of clip metadata ● Network setup, operation on browser ■ VANC data recording/playback function (59.94 Hz, 50 Hz only) Recording and playback of ancillary data (VANC data) of up to 5760 bytes per frame conforming to SMPTE 291M is superimposed on the vertical blanking area of video. ■ Menu-based Setup Perform setup while viewing the setup menus on the 4.3-inch color LCD monitor of this unit or a monitor TV display. ■ AVC-Intra standard feature The AVC-Intra codec is provided as a standard feature. An Intra-Frame compression format based on the H.264 video compression standard makes possible a high compression rate and high-quality image. The AVC-Intra codec for this product is compatible with the following two formats. AVC-Intra 100: High-quality video supporting full-bit HD AVC-Intra 50: Low-rate and low-cost operation ■ Built-in up/down/cross converter for output and up converter for input The AJ-HPD2500 provides a built-in up/down/cross converter for output as standard. It also up-converts composite and SDSDI input signals to record in the same HD format as the system. ◆ NOTE: • The cross converter function is not available during up-conversion recording. • SD closed caption signals during up-conversion recording are recorded in the 608 HD (VANC) signal format (59.94 Hz only). • Closed caption signals are not output during playback with downand cross-conversion. • Nor are closed caption signals output during playback of upconverted SD signals. ■ Frame rate conversion Recording input from variable frame-rate cameras at 24PN (Native), the unit is also capable of playing back cards recorded at 24 fps and converting the output to 1080/24 PsF. It can also record input from a variable frame-rate camera at 25PN (Native). ◆ NOTE: • Do not use cards that have been edited or contain clips shot in different formats as the loss of management data may prevent normal playback. 20 Introduction: Features