Panasonic AJ-HPD2500 Operating Instructions - Page 191

Setup LCD This menu is used for setting up the LCD monitor. • XX indicates factory default settings. Item FR SUPER No. DISP. 900 LCD PROTECT 905 BRIGHT 910 CONTRAST 911 R CONTRAST 912 G CONTRAST 913 B CONTRAST Setting FR SUPER No. DISP. 0000 OFF 0001 ON 0000 -7 | | 0007 0 | | 0014 7 0000 -30 | | 0030 0 | | 0060 30 0000 -30 | | 0030 0 | | 0060 30 0000 -30 | | 0030 0 | | 0060 30 0000 -30 | | 0030 0 | | 0060 30 Settings and brief function description Sets LCD protect mode. OFF: Protect mode is off. ON: Protect mode is on. NOTE: • LCD output is turned off when the front panel is not used or video is not updated for about 5 minutes. • To cancel protect mode, press a front panel button, dial or start playback from the controller. The operation that canceled LCD PROTECT mode will then take place. Adjusts the brightness of the LCD monitor. Adjusts the contrast of the LCD monitor. NOTE: This setting multiplied by the R, G and B contrast settings (setup menus No. 911 (R CONTRAST), No. 912 (G CONTRAST), No. 913 (B CONTRAST)) makes the R, G and B contrast setting. Adjusts the R (Red) contrast of the LCD monitor. NOTE: This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the contrast setting. Adjusts the G (Green) contrast of the LCD monitor. NOTE: This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the contrast setting. Adjusts the B (Blue) contrast of the LCD monitor. NOTE: This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the contrast setting. Setup: Item Settings 191