Panasonic AJ-HPD2500 Operating Instructions - Page 131
Client setting, Press the MENU button.
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Connections Setting: Item MAC ADDRESS DHCP Description MAC ADDRESS (unique ID) DHCP setting IP ADDRESS SUBNET MASK DEFAULT GATEWAY PRIMARY DNS SECONDARY DNS NETWORK IP address Subnet mask Default gateway Set primary DNS server Set secondary DNS server Network service start setting Set value Factory defaults Cannot be changed. Set value (cannot be changed) ENABLE: Uses DHCP (automatic assignment) DISABLE DISABLE: Does not use DHCP (automatic assignment) Enter using the ten keypad 192.168.0.2 Enter using the ten keypad 255.255.255.128 Enter using the ten keypad 192.168.0.1 Enter using the ten keypad 0.0.0.0 Enter using the ten keypad 0.0.0.0 ENABLE: Starts network service when the unit is DISABLE turned on. DISABLE: Does not start network service. ◆ NOTE: • When NETWORK is set to ENABLE, starting up may take longer time since the unit will connect to the network when it is turned on. • The network cannot be accessed when NETWORK is set to DISABLE. A switch between ENABLE and DISABLE does not take effect until the unit is restarted. • A change in setting may lengthen the time required for the setup screen to close since the network service will have to be restarted using a different setting. • When DHCP is set to ENABLE, settings other than MAC ADDRESS and NETWORK are disabled. • IP address, subnet mask and default gateway must be correctly combined. If the "CANNOT ACCESS GATEWAY!" warning appears as the setup screen closes, consult the network administrator. • Set 0.0.0.0 when default gateways or DNS will not be used. • DHCP and DNS may not operate properly in some network environments. Client setting Follow the steps below to make the required settings such as an address of connection server to use the FTP client to transfer clips or the HTTP browser. 1 Open the thumbnail screen. 4 The client setup screen appears. Current settings appear. Use the cursor buttons to select an item and press the SET button to set it. 2 Press the MENU button. 3 Use the cursor buttons to choose [NETWORK] - [SETUP] - [CLIENT] and press the SET button. FTP CLIENT: Item URL USER ID USER PASSWORD SSH Description Setup procedure Name or address of Enter using the full keyboard. (up to 500 characters). connection server ID of the user making the Enter using the full keyboard. (up to 31 characters) connection Password for user making the Enter using the full keyboard. (up to 31 characters) connection. Set to use SSH for file ENABLE: Enables SSH. transfers. DISABLE: Disables SSH. Factory defaults No setting No setting No setting DISABLE • The set password cannot be displayed on this unit. Connections: Connecting This Unit to a Network 131