Panasonic AJ-HPD2500 Operating Instructions - Page 182

Item FR SUPER No. DISP. 511 DF MODE 512 TC OUT REF 513 VITC OUT 514 HD EMBD VITC 515 HD EMBD LTC 518 VITC GEN 519 UB OUT SEL Setting FR SUPER No. DISP. Settings and brief function description 0000 0001 DF 59.94Hz 29.97Hz only NDF Sets the DF or NDF mode for CTL and TCG. 0: Uses drop frame mode. 1: Uses non-drop frame mode. 0000 0001 VOUT TC_IN 59.94Hz 50Hz 23.98Hz 24Hz 29.97Hz 25Hz only Specifies how the phase is switched for the time code output by the TIME CODE OUT connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE mode) 0: Synchronized with output video signal. 1: Synchronized with the external time code input. 0000 0001 SBC VAUX Specifies how to output VITC that will be superimposed on the SD output video signal. 0: Outputs the time code recorded in the SBC area as VITC 1: Outputs the time code recorded in the VAUX area as VITC NOTE: VITC data detected in the input video signal is automatically recorded in the VAUX area during video recording. 0000 0001 OFF Specifies whether or not VITC data will be superimposed on HD SDI output. ON 0: Not superimposed 1: Superimposed 0000 0001 OFF Specifies whether or not LTC data will be superimposed on HD SDI output. ON 0: Not superimposed 1: Superimposed 0000 0001 OFF ON 59.94Hz 50Hz only Specifies whether or not the internal time code generator value should be recorded in the VAUX area. 0: The internal time code generator value is not recorded. Record the time code value when it is superimposed on input video signals. 1: The internal time code generator value is recorded. NOTE: When 23.98, 24, 29.97, 59-23, 60-24, 25, 60-25 is selected in menu No. 25 (SYSTEM FREQ), the internal time code generator value is recorded as the time code in the VAUX area. 0000 0001 SBC 59.94Hz 50Hz only F_RATE Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors during playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as optional AVC-Intra 1080/24PN, 30PN and 25PN clip formats. 0: Outputs the user bits recorded in the SBC area. 1: Outputs the frame rate information recorded in the VAUX area. Definition of terms: SBC (Sub Code Data) area: VAUX (Video Auxiliary Data) area: This area, which is separate from video and audio data area on a P2 card, stores SMPTE/ EBU compliant time code, recording dates and other information. An area in the video data on a P2 card that stores additional information on video data. 182 Setup: Item Settings