Panasonic AJ-HPD2500 Operating Instructions - Page 209

For Long and Trouble-Free Operation Item Thumbnail Hard disk On-screen keyboard Playlist Message Description Measure UNKNOWN DATA! The metadata character code is invalid. Use UTF-8 for the metadata character code. Use the viewer to enter correct characters. USER CLIP NAME MODIFIED! Characters in the clip name had to be deleted in adding the counter value. The user clip name plus the counter value can only contain up to 100 bytes. Characters in the clip name are automatically deleted when the total exceeds 100 bytes. WRITE PROTECTED! The P2 or SD memory card is write protected. Insert write-enabled media. CANNOT ACCESS CARD! An error occurred during P2 card access. Check P2 card. CANNOT ACCESS TARGET! An error occurred during hard disk access. Check hard disk status and connection. CANNOT COPY! FORMAT HDD TO FAT Clips cannot be copied to hard disk without partitions. Format using a FAT format or export data from a P2 card to create a partition. CANNOT FORMAT! The hard disk cannot be initialized. Connect another hard disk drive. CANNOT RECOGNIZE HDD! The destination target cannot be properly recognized. Reboot the hard disk or connect a different hard disk. CANNOT SELECT! It is not possible to mount more than 6 hard disk Cancel some of the selected partitions. MAX.6 PARTITIONS partitions simultaneously. CARD IS EMPTY! CANNOT COPY! The P2 selected for copying is empty. Copying is not performed since the card is empty. FORMAT P2 CARD! Importing is not possible to a P2 card containing Format the P2 card. clips. HDD CAPACITY FULL! Not enough space left on the hard disk. There is not enough space on the connected hard disk. Use a new hard disk or formatted hard disk. HDD DISCONNECTED! The unit is not connected to a hard disk. Reconnect the USB cable. If the hard disk does not operate normally, turn it off and turn it back on again. MISMATCH COMPONENT! Copying is not possible since the model numbers Use a P2 card with the same model number or of the two cards differ. import video in clip units. P2 CARD IS UNFORMATTED! The P2 card is not formatted. Use a formatted P2 card. TOO MANY PARTITIONS! There are too many partitions. Hard disks can handle up to 23 partitions. Use a new hard disk or formatted hard disk. TOO MANY TARGETS! Multiple devices are connected. Disconnect devices, turn off the unit and turn it back on again. UNKNOWN DEVICE The connected DVD drive is not compatible. CONNECTED! Disconnect devices, turn off the unit and turn it back on again. VERIFICATION FAILED! The compare check after copying failed. Copy the data again. CANNOT CHANGE! An attempt was made to change PERSON when First enter a text memo. no text memo had been entered. CANNOT SET! INVALID VALUE! The entered value is invalid. Enter a valid value. CANNOT FIND CLIP! Specified clip could not be found. Insert the card with the clip. CANNOT FIND SAME There are no clips in a matching playlist format. Use clips that match the playlist format. FORMAT! CANNOT MOVE! Move operation is not possible. Select a consecutive area. CANNOT OPERATE AT "RED" EVENT! Not allowed in a playback disable (marked red) event. An illegal operation was attempted in a disabled event. Use a playback enable event or insert a card with suitable clips. CANNOT OPERATE WITH EXTERNAL PLAYER A.DUB is not available when an external player is Select a P2 card as a player. used. CANNOT OPERATE: Since the selected events include a red A.DUB "RED" A.DUB EVENT event, operation is not possible. INCLUDED Remove the red A.DUB event from the selection. For Long and Trouble-Free Operation: Error Messages 209