Panasonic AJ-HPD2500 Operating Instructions - Page 138
Writing back clips from the FTP server, import copy
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
5 Select [YES] and press the SET button. The clip will now be copied. ➝For details on precautions in importing clips, refer to "Copying Clips" (page 63). Writing back clips from the FTP server (import copy) Use the steps below to write back selected clips from an FTP server on the network to a P2 card or hard disk. 1 Open the FTP thumbnail screen. 2 Select the clip to copy from the thumbnails displayed on the server. 3 Press the MENU button. 4 Use the cursor buttons to choose [OPERATION] - [COPY] and press the SET button. When copying ends, "COPY COMPLETED!" appears. ◆ NOTE: • Depending on the number of clips on the server and network conditions, it may take some time to display thumbnails or copy them. • To interrupt copying, press the SET button, select [YES] in the cancel confirmation dialog that appears and press the SET button again. The incomplete copy at the destination is deleted if the network connection has not been broken. If it has, an incomplete clip may remain on the FTP server. • When copying starts, communications cut errors will no longer be detected. Use the above procedure to interrupt a copy operation that has stalled. • Since it is not possible to check the remaining capacity of the FTP server, ask your FTP server administrator. • Whether an error is generated when the remaining capacity of the FTP server reaches 0 depends on the FTP server. If an error is not generated, use the above procedure to interrupt operation. • Clips cannot be copied to a folder on an FTP server that contains 1000 clips or more. • To use SSH, the FTP server must be SSH compliant. • Setting SSH to ENABLE will reduce transfer speed. • To check the result of a transfer on a PC, it may be necessary to use refresh on the PC. 5 Select a destination (P2 slot or hard disk folder) from the menu list to start writing back data. ◆ NOTE: • Depending on the number of clips on the server and network conditions, it may take some time to display thumbnails or copy them. • To interrupt copying, press the SET button, select [YES] in the cancel confirmation dialog that appears and press the SET button again. The incomplete copy at the destination is deleted. • When copying starts, communications cut errors will no longer be detected. Use the above procedure to interrupt a copy operation that has stalled. • Clips cannot be copied to a folder on a P2 card or hard disk that contains 1000 clips or more. • To use SSH, the FTP server must be SSH compliant. • Setting SSH to ENABLE will reduce transfer speed. • After an error occurred during operation such as copying, connection to the FTP server may be disabled and operation can no longer be continued. If this happens, return to the FTP explorer screen to display the FTP thumbnail screen, then restart operation such as copying. 138 Connections: Connecting This Unit to a Network When the copying ends, "COPY COMPLETED!" appears.