Panasonic AJ-HPD2500 Operating Instructions - Page 186

Item FR SUPER No. DISP. 680 CC (F1) BLANK 681 CC (F2) BLANK 684 EDH(SD) 685 ESR MODE(SD) 688 CC REC 689 COMP MODE 690 UMID REC 691 UMID GEN 692 UMID POS Setting FR SUPER No. DISP. Settings and brief function description 0000 0001 BLANK THRU 59.94Hz only Turns on and off closed caption signals in the first field output from the SD SDI and analog composite output during playback. 0: Signals are forcibly blanked. 1: Signals are not blanked. NOTE: In EE mode, the closed captions are output superimposed on the input signal. 0000 0001 BLANK THRU 59.94Hz only Turns on and off closed caption signals in the second field output from the SD SDI and analog composite output during playback. 0: Signals are forcibly blanked. 1: Signals are not blanked. NOTE: In EE mode, the closed captions are output superimposed on the input signal. 0000 0001 OFF 59.94Hz 50Hz 23.98Hz 29.97Hz 59-23Hz 25Hz ON 60-25Hz only Specifies whether or not EDH is superimposed on SDI OUT signals. 0: Signals are not superimposed. 1: Signals are superimposed. 0000 0001 OFF AUTO 59.94Hz 29.97Hz only Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit. 0: ESR is forcibly set to off. 1: ESR is automatically turned on and off depending on operating mode. 0000 0001 OFF 59.94Hz only ON Specifies whether or not the closed caption signal that is superimposed on the SD SDI and analog composite input signals will be recorded. 0: Not recorded. The EE output is also blanked. 1: A closed caption signal that is superimposed on an input signal is recorded. 0000 0001 NORMAL 59.94Hz 50Hz 29.97Hz 59-23Hz 60-24Hz 25Hz DARK 60-25Hz only Selects the compression method used during video recording. 0: Records using normal compression processing. 1: Records video suppressing compression video distortion that is generated by dark areas that are about 10 IRE (70 mV) or less. NOTE: This setting is available in DVCPRO HD 720p mode recording. 0000 0001 OFF Specifies whether or not UMID data should be recorded. ON 0: UMID data is not recorded. 1: Recorded. 0000 0001 INT EXT Specifies the generation method of UMID information that is recorded when setup menu No. 690 (UMID REC) is set to ON. 0: Newly created UMID information is always recorded. 1: Records UMID data superimposed on the input signal. Newly created UMID information is recorded when not superimposed on an input signal. 0000 0001 | 0006 | 0008 BLANK 12L | 17L | 19L Specifies the line that superimposes UMID data. NOTE: • You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502 VITCPOS-2. • Holding down the SEARCH button and pressing the RESET button will not restore the factory defaults. • UMID data is output before recorded VANC data. To output VANC data, set UMID POS to a line other than that which superimposed the data or select "BLANK." • During playback of DVCPRO HD native clip, UMID becomes NO-INFO. 186 Setup: Item Settings