Panasonic AJ-HPD2500 Operating Instructions - Page 61

Attaching Text Memos and Shot Marks A text memo can be attached in a clip to mark a specific location. The user can attach shot marks to distinguish clips from each other. This function is not available on cards where the write protect switch has been set to PROTECT. Attaching Text Memos 2 Press the MENU button and choose [THUMBNAIL] - [TEXT MEMO CLIPS] from the thumbnail menu. The thumbnails of clips with text memos appear at the top of the LCD monitor. Information on the selected clip text memo appears in the lower half of the LCD monitor. Use the NEXT and PREV buttons to locate attached text memos during video playback. ➝Refer to "Setup menu No. 103 (SEEK SEL)" (page 177). Clip Management Thumbnail Blue indicates selected display number of text memo clips and white indicates total number of text memo clips. Indicates still images included with the text memos. 1 1 Press the TEXT MEMO button during recording, playback or when thumbnails are displayed. • Press this button during recording and playback where you want to attach a text memo. • Pressing this button in the thumbnail screen adds a text memo at the thumbnail clip location (normally at the beginning). ◆ NOTE: • In the following instances, the thumbnail in the row below at the text memo location may be replaced with when a text memo clip appears. - An AVC-Intra clip with a different SYSTEM FREQ setting. 3 Place the cursor on the clip (with a text memo) you want play back and press the SET button. The cursor moves to the lower half of the LCD monitor. ◆ NOTE: • Up to 100 text memos can be attached in one clip. • Pressing the TEXT MEMO button during playback may temporarily halt playback. This is normal and not a malfunction. • Text memos are not recorded during LOOP REC or VFR ON recording. Playing back from text memo location 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. The cursor moves. 61 Clip Management: Attaching Text Memos and Shot Marks