Panasonic AJ-HPD2500 Operating Instructions - Page 171

Setup Video Output Signal Adjustments The control matrix for adjustments is shown below. When CMPNT is selected in setup menu No. 650 (STYLE) Setting 05: ENCODER SEL LOCAL BOTH Adjustment 653: Y LVL 654: Pb LVL 655: Pr LVL 656: BK LVL This unit External encoder remote controller/this unit This unit: Only setup menu adjustments are available. External encoder remote controller/this unit: External encoder remote controller and setup menu adjustments are available. BASIC When CMPST is selected in setup menu No. 650 (STYLE) Setting 05: ENCODER SEL LOCAL BOTH Adjustment 662: V LEVEL 663: C LEVEL 664: HUE/C PHASE 665: SETUP/BK LVL This unit External encoder remote controller/this unit This unit: Only setup menu adjustments are available. External encoder remote controller/this unit: External encoder remote controller and setup menu adjustments are available. This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12 and 24-hour clock display, sets superimposed display, character displays in superimposed display, setup menu and other displays, sets recording formats, sets the formats that can be added to the playlist and sets the time of the internal clock. • XX indicates factory default settings. Item FR SUPER No. DISP. 001 LOCAL ENA 002 CTL DISP 003 REMAIN SEL Setting FR SUPER No. DISP. 0000 0001 DIS STOP 0002 ENA 0000 0001 ±12h 24h 0000 0001 0002 0003 OFF 2L 1L P2&SD Settings and brief function description Restricts the number of buttons on the key panel that are available when the REMOTE/ LOCAL switch is set to REMOTE. 0: No buttons are available. 1: Only the STOP button is available. 2: All buttons are available. Switches the CTL counter display between 12 and 24-hour clock display. 0: 12-hour clock display 1: 24-hour clock display Specifies whether to display the remaining time or total time via superimposed display. 0: No display. 1: The second line shows remaining time and total time of the P2 card. 2: The first line shows remaining time and total time of the P2 card. 3: The first line shows remaining time and total time of a P2 card, the second line shows remaining time on an SD memory card. NOTE: • These functions are not displayed when "2L" is selected and "TIME" is set in setup menu No. 006 (DISPLAY SEL). • Total tape time is not displayed when "P2&SD" is selected and "TIME" is set in setup menu No. 006 (DISPLAY SEL). • In the following cases, the remaining time is shown on the second line when a setting other than OFF is selected. - When setup menu No.040 (VFR REC) is set to ON - When setup menu No.041 (LOOP REC) is set to ON - When setup menu No.155 (AUTO REC) is set to something other than OFF so that recording and stopping can be performed automatically • The remaining time for P2 cards is not displayed when no P2 card has been inserted. • The remaining time for SD memory cards is not displayed when an AJ-YCX250G AVCHD codec board (optional) has not been installed or an SD memory card has not been inserted. Setup: Item Settings 171