Panasonic AJ-HPD2500 Operating Instructions - Page 192

MENU This menu is used for menu settings. • XX indicates factory default settings. Item FR SUPER No. DISP. A00 LOAD A01 SAVE A02 P.ON LOAD A03 MENU LOCK A04 PF1 ASSIGN A05 PF2 ASSIGN A06 PF3 ASSIGN A10 CARD READ A11 CARD WRITE A12 CARD FORMAT Setting FR SUPER No. DISP. Settings and brief function description Remarks 0000 0001 0002 0003 USER2 USER3 USER4 USER5 Specifies user files loaded in USER 1. 0: Loads the contents of USER 2 1: Loads the contents of USER 3 2: Loads the contents of USER 4 3: Loads the contents of USER 5 Setting available for USER1 only NOTE: Pressing the MENU button when loading completes opens a confirmation dialog. Press the SET button to store the setting. Press the EXIT button to discard the change and retain the setting. 0000 0001 0002 0003 0004 USER2 USER3 USER4 USER5 LOCKED Specifies the user file that saves USER 1 settings. 0: Saved to USER 2 1: Saved to USER 3 2: Saved to USER 4 3: Saved to USER 5 4: Appears when all user files are write protected. Setting available for USER1 only NOTE: • A user file in change prohibit status cannot be selected. • When all user files are in the change prohibit status, "LOCKED" appears and data cannot be saved. 0000 0001 0002 0003 0004 OFF USER2 USER3 USER4 USER5 Specifies which user files will be loaded into USER 1 and whether or not the USER 1 settings should be used in startup when the power is turned on. 0: Operation is started with the settings of the previously set user file. 1: The content of USER 2 is loaded into USER 1. 2: The content of USER 3 is loaded into USER 1. 3: The content of USER 4 is loaded into USER 1. 4: The content of USER 5 is loaded into USER 1. Setting available for USER1 only 0000 0001 OFF ON Sets/releases the user file (USER2 - USER 5) lock mode. 0: Releases the lock. (File data can be changed.) 1: Lock is engaged. (File data cannot be changed.) Setting available for USER2 to USER5 only NOTE: • USER 1 cannot be locked. • Files can be loaded from the SD memory card even if they are locked. The status after load operation depends on the setting defined by the loaded data. Registers a setup menu item in the PF1 button. Registers a setup menu item in the PF2 button. Registers a setup menu item in the PF3 button. Select files from the four SD memory card files to load into the menu. Setting available This function is available only to USER 1-5 (SYSTEM) and USER 1-5. for USER1 only Select one of the four files on an SD memory card to write a menu setting. The write function is available only to USER 1-5 (SYSTEM). Titles can be added to the files and the files can be edited. Setting available for USER1 only Formats SD memory cards. Setting available for USER1 only 192 Setup: Item Settings